Honda Potong rumput / Brush Cutter UMR 435T

2007840 potong-rumput-honda-umr-435-t-brush-cutter
Gambar: Gambar atau foto berperan sebagai ilustrasi produk. Kadang tidak sesuai dengan kondisi terbaru dengan berbagai perubahan dan perbaikan. Hubungi tim sales kami untuk f yang lebih baik perihal gambar di (021) 2933 8828.
Blade Diameter 305 mm | Cutter rpm 5250 rpm (at 7000 engine rpm) | Length *1 2838 mm | Width 299 mm | Height 462 mm | Dry weight *2 10.0 kg
Order Number : SKU-416
Manufacture : Honda
Model : UMR 435 T
Berat Pengiriman : 13 Kg

Share & Menangkan Hadiahnya

Detail Data Teknis Honda UMR 435 T

  • Cutter
  • Type 2-blade cutter
  • Blade Diameter 305 mm
  • Cutter rpm 5250 rpm (at 7000 engine rpm)
  • Dimensions
  • Length *1 2838 mm
  • Width 299 mm
  • Height 462 mm
  • Throttle type Dual trigger throttle
  • Dry weight *2 10.0 kg
  • Engine
  • Model GX35T
  • Type 4-stroke, overhead cam, single cylinder
  • Displacement 35.8 cm3
  • Bore x stroke 39.0 x 30.0 mm
  • Compression ratio 8.0 : 1
  • Net Power (SAE J1349)* 1.0kW (1.3 HP)/7000 min-1 rpm
  • Fuel consumption (@ net power) 0.71 l/h at 7000 rpm
  • Max. Net Torque (SAE J1349)* 1.6 N.m (0.16 kgf.m, 1.2 lbf.ft)/5500 min-1 rpm
  • Fuel tank capacity 0.63 l
  • Fuel used Unleaded gasoline (Oktan 86 or higher)
  • Oil capacity 0.1 l
  • Ignition system Transistorized magneto ignition
  • Starting system Recoil starter
  • Air cleaner Semi dry type

Deskripsi Produk Honda UMR 435 T

  • M4 Mini 4-Stroke OHC engine
  • Work through a full 360 degree with 2 blade cutter
  • Pipe frame (loop hadle), flexible shaft, reduce vibration, high durability and maximum torqe power
  • fine trigger throttle to adjust speed boost can be acquired trough the sub throttle lever
  • protective o-ring prevents dust and water into clutch and flexible shaft chamber
  • coil spring reduces vibration and prolong units usage life
  • shoulder belt and back supporter

Rating Produk Honda UMR 435 T

Garansi Produk Honda UMR 435 T












SIMULASI PENGIRIMAN